Single-screw extruder Korean small power can be bought for 10-20 thousand euros, and modern dvushnekovy from leading manufacturers – for 200-300 euros. The bulk of the Russian manufacturers of small works on extruders Korean production, costs of purchase and installation of whom recovered within 1.5 years. In 2005, significantly changed the structure of Russian industry manufacture of pipes. Since 2003, the Russian production of an increasing proportion of products released to medium-sized enterprises, while small companies are gradually reducing their output. If at the end of 2003, approximately 35% of the total volume made of polyethylene pipes were in small businesses by the end of 2005, this percentage slightly above 20%. In the Russian production has been possible to identify a few large producers, controlling not only local markets but also sells its products in other regions. Of all the enterprises producing polyethylene pipes in Russia, there are two major share of which exceeds 35% of the total production. This holding 'Evrotrubplast' and of 'Kazanorgsintez'.

Over 20% of Russian production of polyethylene pipes are produced by JSC 'Kazanorgsintez', whose facilities are located on one site. Enterprise produces polyethylene pipes for gas pipelines to GOST R 50864-95 63-315 mm in diameter and pressure in accordance with GOST 18599-2001 diameter of 10-1200 mm. Until 2006, the pipes made of polyethylene own production grades of PE and PE-63-80. The company 'Kazanorgsintez' 1 January 2006 withdrew from the production of polyethylene pipe grade PE-63. This decision was taken because the brand PE-63 is outdated and does not meet international quality standards.